It takes time to become a good plumber, i.e., he has to spend more time for his career to be successful. There are many areas where a faucet replace like "wet only plumber" & in "Gas Industries". In the first type work is done in homes such as fitting bathroom, sprinkler system. Second type is very sensitive. To work in a gas industry one has to first achieve Council of Registered Gas Installer Certificate. Some plumbers normally work in domestic areas such as leaky taps & blocked sinks etc. Normally whatever field a plumber chooses the basic thing he must know is Water Regulations & Building Regulation.
There are two, one on each side of the toilet, closet bolts which hold the toilet to the floor. If there are caps over the bolts, remove or pop them open. Using a small crescent wrench unscrew the nuts from the bolts. Alternate side to side when unscrewing this will be much more important when reinstalling the water line repair bolts but alternate anyhow.
17. Do you know that if a severe gale warning is given, the mean wind speed is expected to reach force 9 (41knots)? Do you know what imminent, soon, and later mean; what the definition of the various of states of visibility are, and do you understand what slowly, steadily and rapidly mean in relation to pressure system movements? I have a simple handout with all the useful expressions.
Once you have disconnected the tank remove it from your work space. Do a thorough measurement of the remaining pipe for reference when you go to the hardware store. I will be honest with you, you might need to make a few trips back to the store. Once you get the new tank, slide it into place to line up the plumbing.
Plumbers, like all other companies, are required to be on time and act professional. If they have called before hand to notify you then, this can be overlooked. However, if they turn up without apologising for being late, then they may not be the right plumber for you. Remember first water line repair impressions are everything. If they lack a good first impression then this may indicate that it is going to have an impression on their work. In most cases, you would have taken the time off work for the plumber, and what can be worse than waiting all day waiting for them to arrive?
Turn the water off at the main shutoff valve at the street. You should be able to take a pair of pliers(or your bare hands) and turn the valve at the water meter to shut off the water to your home. Once you have shut off the water you can cut the pipe around the leak and make the repair.
Then, you can take your new shower parts home and reinstall them in the inner assembly. It is very important that everything be aligned properly and tightened to prevent leaks. Beware of over tightening, however, since this can also cause problems. Once you are sure everything is installed properly, replace the cover plate and turn the water back on to test your repair work. With a little bit of work, your do-it-yourself shower repair project can be a success. It does not take an expert, just a little effort and know how.